7615 SERIES
96x96 DIN 43700
• High quality
• 3 1/2 digit LED display
• Automatic temperature compensation
• 0/20mA 4/20mA adjustable output
• 2 min/max control relays
• Extractable terminal blocks
• Isolated output as option
General informations
This series of controllers has been designed to carry out the measurement and the regulation of:
• pH
• O.R.P
• E. Conductivity
• Free Chlorine
• Temperature
in industrial processes, with continuous readings on digital indicators.
These instruments give both a valid, low cost measurement and regulation system for small industrial and ecological plants, and they can be used as 0/20 mA or 4/20 mA visualized transmitters for field applications.
Connections are made by means of two extractable terminal blocks on the rear side of the instrument, which allow easy cables connection and easy maintenance of the instrument.
The panel mounting instrument's enclosure is designed according to the DIN 43700 standards and it consists of a plastic case with metallic front panel coated with a polycarbonate membrane, to ensure the maximum anticorrosion characteristics.
A transparent splashproof front door can be added to the housing, in order to protect the unit from excessive moisture or corrosive fumes.
The package is supplied complete with fixing clamps for panel mounting.
Functional specifications
Display
The controller provides a digital readout on a 3 1/2 digit display that allows reading even at long distances.
Calibration
The zero and the sensitivity adjustment is done by means of trimmers mounted on the front panel.
Control relays
The controller features two on-off regulators.
Set-points are independent and their value is displayed by pushing a button on the front panel.
Relays activation is displayed on the front panel by their corresponding LEDs.
Analog output
Instruments provide a 0/20 mA analog output (4/20 mA, volt on request).
The 0/20 mA output may be adjusted to 4/20 mA by the operator.
Options
Functional features may be extended by following options:
091.203: 0/5 s delay and selectable min/max relays function
091.311: 4/20 mA output
091.362: isolated analog output
091.403: 24 Vac power supply
Common Specifications
Zero : adjustment: ±15%
Slope adjustment : ±20%
Output : 0/20 mA dc 300 ohm max.
Regulator hysteresis: ±0,25%
Switching Time : < 0.5 s
Relay contacts : SPDT 5 A 220 V resistive load
Temperature : 0/50 °C
Humidity : 95% without condensate
Voltage : 110/220 V ±10% 50/60 Hz
Power : 3 VA max.
Terminal blocks : extractable
Weight : 500 g
Size: 96 x 96 x 150 mm (1/4 DIN)
CL 7615
Potentiostatic Chlorine controller
This unit, together with the flow cell and the potentiostatic electrode, is the best and most advanced system for chlorine measurement.
Because of the potentiostatic measuring method, it is not necessary to recalibrate the zero, the measuring is very accurate and direct chlorine readout appears on the display.
Also this accurate method prevents the fluctuation of the chlorine levels as on the amperometric and ORP methods.
This potentiostatic system represents the state of the art in the drinking water, swimming pool industry and others.
Specifications
Input: from potentiostatic electrode SZ 283
Scale: 0/5.00 PPM (others as requested)
Hysteresis: ±0.03 PPM