CD3000S-1PH
Solid-state relay
CD3000S 1PH is a compact low cost family of solid state switches designed to replace contactors.
Single-phase thyristor units up to 700A.
Applicable for resistive loads and infrared lamp*.
Zero crossing firing available with logic input signal (SSR) or as an option with Ac 110 Vac or 230 Vac input from 15A to 110A.
Constant current drain with SSR input.
Basic analog input 4÷20mA loop powered, with burst firing 8 or 16 cycle at 50% power requested, is available as an option from 15 to 110A. analog input 4÷20mA or 0÷10V with Burst firing 4, 8 or 16 cycle at 50% power requested, is available as an option from 15 to 110A.
Heater Break alarm (HB) to diagnostic partial or total load failure and short circuit on
Thyristor, is available as an option from 15A to 110A.
Side by side mounting.
Special design for heatsink with high dissipation.
IP20 protection**.