- About Us
- Products & Solutions
-
Analytical Instruments
Digital Meters
Portable Instruments
Benchtop Instruments
Spares & Accessories
Stand
Laboratory & Industrial Electrodes / Sensors
Laboratory Sensors - pH / Redox/ Conductivity/ Dissolved oxygen & ISE
Industrial Electrodes / Sensors
Spares & Accessories
Online Water Quaity Analysers Instruments
Transmitters
Analysers / Controllers
Analog / Digital Output Probes & Sensors
Flow Cells, Enclosures & Accessories
-
- Services & Support
- New Launch
- Career
- Events & Exhibitions
- Contact Us
-
CL6587.103
The possibility of using sensors for the main oxidizing substances, such as free, combined, and total residual chlorine, dissolved ozone and chlorine dioxide, residual hydrogen peroxide and peracetic acid, makes it suitable for many applications and types of systems. The device can perform the following functions: - view the measurements of oxidants, pH, redox and temperature; - automatically adjust the oxidant, pH and redox values; - provide, as an alternative to PID regulation, 0-20 mA or 4-20 mA measurement outputs programmable on the main measurement and temperature scale; - provide an RS485 and Modbus digital output (function 03); - activate the alarm for measurement values outside the limits, excessive permanence of the set points and closure of the logic inputs; - activate the alarm or keep the instrument in hold conditions using two external contacts; - activate automatic or manual sensor cleaning cycles.
-
DescriptionDocument Files
The possibility of using sensors for the main oxidizing substances, such as free, combined, and total residual chlorine, dissolved ozone and chlorine dioxide, residual hydrogen peroxide and peracetic acid, makes it suitable for many applications and types of systems. The device can perform the following functions: - view the measurements of oxidants, pH, redox and temperature; - automatically adjust the oxidant, pH and redox values; - provide, as an alternative to PID regulation, 0-20 mA or 4-20 mA measurement outputs programmable on the main measurement and temperature scale; - provide an RS485 and Modbus digital output (function 03); - activate the alarm for measurement values outside the limits, excessive permanence of the set points and closure of the logic inputs; - activate the alarm or keep the instrument in hold conditions using two external contacts; - activate automatic or manual sensor cleaning cycles.
Main features - Display: multi-line graph - Entrances: - potentiostatic or polarographic sensors (2 or 3 wires) - glass or antimony pH electrode - redox electrode - Pt100 or Pt1000 - 2 logical inputs for hold / alarm function - Selectable scales in ppm - mg/l - Stairs: - 200.0 ppb - µg/l - 2.000 / 20.00 / 200.0 / 2000 ppm - mg/l - 0 ÷ 14.00 pH - -2000 ÷ 2000 mV - Temperature range: -10.0 / 110.0 °C - 14.0 / 230.0 °F - Manual and automatic temperature compensation. - 2 set points for each input addressable on each of the 4 relays - Alarm: min/max values selectable on the entire scale. - 2 analog outputs: 0-20 mA / 4-20 mA for PID or measurement (main or temperature) - RS485 and Modbus digital output (function 03) - Self-cleaning function - Configuration of parameters on two levels using access codes chosen by the operator - Ambient temperature: 0/50 °C - Power supply: 85/264 V - 50/60 Hz - Container: ABS protection IP 66 - Dimensions: 256 x 230 x 89 mm - Registered ornamental model: 002564666-002 Related Products
Our more than 75 years long noteworthy existence in the market in itself is a proof of satisfaction ...
Contact Us
| P.O. Gagwana - 305023, Distt. Ajmer (Raj.) India |
|
| info@toshcon.com support@toshcon.com |
|
| +91 9829112345 +91-145-2971131/2/3 |