toshcon

Tuesday, 03 19th

Last updateMon, 15 Sep 2014 5am

BENCHTOP MULTI-PARAMETER INSTRUMENTS  (DUAL DISPLAY)
MODEL TPCD 37

  • · pH
  • ·mV
  • ·Ion
  • ·Conductivity
  • ·Dissolved Oxygen
  • ·Temperature
  • ·Inputs 

Common Features 

pH

Multi-point (1…5) calibration for more linearity.
Selectable resolution from 0.001pH to 0.1 pH.
Automatic calibration with any of nine pre-programmed and five user specified pH buffers.
Accepts pH electrodes with any zero point (Eo) between ±999 mV. 

mV

Features mV calibration for accurate ORP measurements.
Selectable resolution from 0.1 mV to 1 mV. 

Ion

Direct concentration measurement.
Ion mode is easily calibrated with any 2...5 standards and a blank correction.
Useable with Ion Selective Electrodes like F , Cl , NO3,NH3, NH4, Br-, I-, CN-, Ca++ etc. 

Conductivity

Multi-point (1…3) calibration for more linearity.
Extended conductivity range; to measure the full range from 0.001 μS/cm to 2000 mS/cm requires 3 electrodes: 0.1, 1 and 10 cm-1.
Selectable reference temperature: 20° or 25°C.
Automatically selects correct range and frequency.
Automatic cell constant determination with any of three preprogrammed or user specified standard tables.
Allows to lock the initial conductivity range to avoid nonlinear titration curves.
Accurate low conductivity measurements by eliminating the capacitive component of the electrode and its cable(avoid the use of long cables!). 

Dissolved Oxygen (only in TPCD 37 & TMULTI 37)

Operates with a galvanic dissolved oxygen electrode requiring no polarisation time and no zero calibration.
Selectable resolution from 0.01 mg/l (0.1%) to 0.1 mg/l (1%).
Manual salinity compensation 0-40 ppt.
Automatic air pressure compensation 600-1300 hPa. 

Temperature

Reads temperatures with 0.1°C resolution.
Manual or automatic temperature compensation (O2, 0…50°C) .
Calibrates temperature probe for quality measurements. 

Inputs

Two BNC inputs for pH, mV, Ion, dissolved oxygen or conductivity.
Two corresponding reference inputs.
Two corresponding temperature inputs.
Low voltage DC input for e.g. a mains adaptor. 

  • ·Outputs

USB interface for connection to a computer.
RS232 interface for connection to a printer or computer. 

  • ·Data-logging 

Stores up to 12000 values including temperature, time and date.
Allows to mix data from all ranges in the same table.
A powerful data acquisition software for PC is available optionally. 

  • ·Cabinet 

Robust dust and splash-proof cabinet.
An optional wall mounting kit allows to fix the meter to any wall making more space available on the desk. 

  • ·Special features 

No electrical interference between electrodes in the same solution.
Two-way communication with a printer or computer using RS232 or USB.
Can be programmed to continue automatically with the measurements or data-logging after a power failure.
Password protection prevents any unauthorised access to the instrument.
Optional 12V car adaptor. 

  • ·GLP 

All procedures for a “Good Laboratory Practice” are on board.

TPCD 37 

pH                                -2 ....+16 pH
mV                               ±2000 mV
Conductivity                  0 .... 2000 mS/cm
Resistivity                     0 .... 200 MW.cm
Salinity                          0 .... 70 ppt
TDS                              0 .... 100 g/l
Dissolved Oxygen         0 .... 60 mg/l
                                 0 .... 600%
Air Pressure                  600 .... 1300 hPa
Temperature                  -5 .... +105°C

You are here: Home Products Analytical Electrodes D.O. TPCD37 (µP)